Hi OpenDev support team,
The review below stuck at Build failed (promote pipeline). Can you please check the status and let me know how to fix this issue? https://review.opendev.org/#/c/720589/
Thanks
Tao Liu, Member of Technical Staff, Engineering,, Wind River direct 613.963.1413 fax: 613.492.7870 skype: tao_at_home 350 Terry Fox Drive, Suite 200, Ottawa, Ontario, K2K 2W5
On Fri, May 8, 2020, at 12:07 PM, Liu, Tao wrote:
Hi OpenDev support team,
The review below stuck at Build failed (promote pipeline). Can you please check the status and let me know how to fix this issue?
The promote pipeline only runs after a change has merged. Rechecking a change will not rerun the promote jobs. Typically the best way to handle promote failures is to fix the cause of the failure, then when the fix merges this will run the promote jobs for the fix change updating your artifacts that way. If the fix is made to a different project then we can trigger the promote jobs separately.
In this case changes to starlingx/distcloud have landed since those failures and promote jobs have run successfully for them. I think this means we don't need to do anything for this particular case.
https://review.opendev.org/#/c/720589/
Thanks
Thanks Clark for looking into this.
Do you know why StarlingX API Documentation was not updated: https://docs.starlingx.io/api-ref/distcloud/? Although, the review has been merged.
Tao
-----Original Message----- From: Clark Boylan [mailto:cboylan@sapwetik.org] Sent: Friday, May 8, 2020 5:50 PM To: Liu, Tao; service-discuss@lists.opendev.org Cc: Jeremy Stanley; Camp, MaryX Subject: Re: Starlingx/API-Ref review
On Fri, May 8, 2020, at 12:07 PM, Liu, Tao wrote:
Hi OpenDev support team,
The review below stuck at Build failed (promote pipeline). Can you please check the status and let me know how to fix this issue?
The promote pipeline only runs after a change has merged. Rechecking a change will not rerun the promote jobs. Typically the best way to handle promote failures is to fix the cause of the failure, then when the fix merges this will run the promote jobs for the fix change updating your artifacts that way. If the fix is made to a different project then we can trigger the promote jobs separately.
In this case changes to starlingx/distcloud have landed since those failures and promote jobs have run successfully for them. I think this means we don't need to do anything for this particular case.
https://review.opendev.org/#/c/720589/
Thanks
On Fri, May 8, 2020, at 3:41 PM, Liu, Tao wrote:
Thanks Clark for looking into this.
Do you know why StarlingX API Documentation was not updated: https://docs.starlingx.io/api-ref/distcloud/? Although, the review has been merged.
Looks like the api-ref job hasn't run recently on that repo: https://zuul.openstack.org/builds?project=starlingx%2Fdistcloud&pipeline.... Looking at the configuration for that job I've found: https://opendev.org/starlingx/zuul-jobs/src/branch/master/zuul.d/project-tem... which shows that the job will only run if these files are updated: https://opendev.org/starlingx/zuul-jobs/src/branch/master/zuul.d/project-tem...
I think the other changes that have merged don't update those files. The easiest way to address this is likely to merge a change to one of those files. Then if that newer change fails to run properly we can debug that failure.
Tao
-----Original Message----- From: Clark Boylan [mailto:cboylan@sapwetik.org] Sent: Friday, May 8, 2020 5:50 PM To: Liu, Tao; service-discuss@lists.opendev.org Cc: Jeremy Stanley; Camp, MaryX Subject: Re: Starlingx/API-Ref review
On Fri, May 8, 2020, at 12:07 PM, Liu, Tao wrote:
Hi OpenDev support team,
The review below stuck at Build failed (promote pipeline). Can you please check the status and let me know how to fix this issue?
The promote pipeline only runs after a change has merged. Rechecking a change will not rerun the promote jobs. Typically the best way to handle promote failures is to fix the cause of the failure, then when the fix merges this will run the promote jobs for the fix change updating your artifacts that way. If the fix is made to a different project then we can trigger the promote jobs separately.
In this case changes to starlingx/distcloud have landed since those failures and promote jobs have run successfully for them. I think this means we don't need to do anything for this particular case.
https://review.opendev.org/#/c/720589/
Thanks
Hi Clark, I submitted a new review, it was merged and the Zuul promote worked as expected. https://review.opendev.org/#/c/726922/ We still don't know why it failed before, but thanks a bunch for the suggestion on how to kick-start it again.
-Mary C.
-----Original Message----- From: Clark Boylan cboylan@sapwetik.org Sent: Friday, May 8, 2020 7:51 PM To: Liu, Tao Tao.Liu@windriver.com; service-discuss@lists.opendev.org Cc: Jeremy Stanley fungi@yuggoth.org; Camp, MaryX maryx.camp@intel.com Subject: Re: Starlingx/API-Ref review
On Fri, May 8, 2020, at 3:41 PM, Liu, Tao wrote:
Thanks Clark for looking into this.
Do you know why StarlingX API Documentation was not updated: https://docs.starlingx.io/api-ref/distcloud/? Although, the review has been merged.
Looks like the api-ref job hasn't run recently on that repo: https://zuul.openstack.org/builds?project=starlingx%2Fdistcloud&pipeline.... Looking at the configuration for that job I've found: https://opendev.org/starlingx/zuul-jobs/src/branch/master/zuul.d/project-tem... which shows that the job will only run if these files are updated: https://opendev.org/starlingx/zuul-jobs/src/branch/master/zuul.d/project-tem...
I think the other changes that have merged don't update those files. The easiest way to address this is likely to merge a change to one of those files. Then if that newer change fails to run properly we can debug that failure.
Tao
-----Original Message----- From: Clark Boylan [mailto:cboylan@sapwetik.org] Sent: Friday, May 8, 2020 5:50 PM To: Liu, Tao; service-discuss@lists.opendev.org Cc: Jeremy Stanley; Camp, MaryX Subject: Re: Starlingx/API-Ref review
On Fri, May 8, 2020, at 12:07 PM, Liu, Tao wrote:
Hi OpenDev support team,
The review below stuck at Build failed (promote pipeline). Can you please check the status and let me know how to fix this issue?
The promote pipeline only runs after a change has merged. Rechecking a change will not rerun the promote jobs. Typically the best way to handle promote failures is to fix the cause of the failure, then when the fix merges this will run the promote jobs for the fix change updating your artifacts that way. If the fix is made to a different project then we can trigger the promote jobs separately.
In this case changes to starlingx/distcloud have landed since those failures and promote jobs have run successfully for them. I think this means we don't need to do anything for this particular case.
https://review.opendev.org/#/c/720589/
Thanks
service-discuss@lists.opendev.org