Open Stack

Yes. It is confusing due to common term ‘EdgeX’ in both places.

JFYI

EdgeXFoundry : Is IOT platform.
MobileEdgeX, EVE and ONAP:  Mainly to orchestrate and automate applications/VNFs on several edge locations.

There is  confusion with Airship too.  Airship is for bare-metal provisioning with respect to deploying host operating system and related utilities/processes to make edge/DC ready.

Thanks
Srini


From: Rob Hirschfeld [mailto:rob at rackn.com]
Sent: Tuesday, February 12, 2019 12:51 PM
To: Addepalli, Srinivasa R <srinivasa.r.addepalli at intel.com>
Cc: bharath thiruveedula <bharath_ves at hotmail.com>; edge-computing at lists.openstack.org; ramkik at vmware.com
Subject: Re: [Edge-computing] Edge Node locator

Thank you for clarifying.  I suspect I'm not the only person getting confused about that.


[https://lh6.googleusercontent.com/ySrnpZRlg0FK6BwnZw-GLxA8PuamwCARuiMJ_VjL4muhF_ifki9TWNgZvtavVZKSv_2mEBFYbr6BEeeb6BkBiJ0l27qL7yCHC7hsPvE1ZbTkyY30JPVO_uKHlH2w3yv4OQI-WUyg]<https://t.sidekickopen10.com/s2t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XZs3M2bjgW64zKpj3LyR22W1qMCsg56dVpDf9jJGjx02?t=https%3A%2F%2Fwww.rackn.com%2F&si=5660451956457472&pi=e084781c-677c-403c-d2c8-81edf582fdae>


Rob Hirschfeld

Co-Founder and Chief Executive Officer, RackN

(512) 773-7522


[https://lh6.googleusercontent.com/HlA5qvRA4ba1F5C0kOubBXP0qF4DlXlIdKyQJG_sWo2FKAIZbsicvGS-8F9WbXQ2ZNLySHg-bb1W3V2BxSR1Z8vpd7mOH798iSxdmvo8q75DqVkq29Cj7Y5VvqiB9sViJwHqSSNY]<https://t.sidekickopen10.com/s2t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XZs3M2bjgW64zKpj3LyR22W1qMCsg56dVpDf9jJGjx02?t=https%3A%2F%2Ftwitter.com%2Fzehicle%3Flang%3Den&si=5660451956457472&pi=e084781c-677c-403c-d2c8-81edf582fdae>[https://lh6.googleusercontent.com/fQXQPBYLS6cl3yZhjq2LhPlzqrCc5WLLZcdFqxsSQjis3xb34H5hoaZkcAYpHIgKEksvW6qhrZYFCscWitnWmR3yTJ34uLfTX0ozwOl_JwJn9c1VFpTtq3xj15SNw66zt8X3-rHc]<https://t.sidekickopen10.com/s2t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XZs3M2bjgW64zKpj3LyR22W1qMCsg56dVpDf9jJGjx02?t=https%3A%2F%2Fwww.linkedin.com%2Fin%2Frhirschfeld%2F&si=5660451956457472&pi=e084781c-677c-403c-d2c8-81edf582fdae>





On Tue, Feb 12, 2019 at 2:47 PM Addepalli, Srinivasa R <srinivasa.r.addepalli at intel.com<mailto:srinivasa.r.addepalli at intel.com>> wrote:
MobileEdgeX is not yet part of LFE.  It may that you might be referring to EdgeXFoundry.  MobileEdgX and EdgeXFoundry are two different projects addressing two different scenarios.

Thanks
Srini


From: Rob Hirschfeld [mailto:rob at rackn.com<mailto:rob at rackn.com>]
Sent: Tuesday, February 12, 2019 12:23 PM
To: Addepalli, Srinivasa R <srinivasa.r.addepalli at intel.com<mailto:srinivasa.r.addepalli at intel.com>>
Cc: bharath thiruveedula <bharath_ves at hotmail.com<mailto:bharath_ves at hotmail.com>>; edge-computing at lists.openstack.org<mailto:edge-computing at lists.openstack.org>; ramkik at vmware.com<mailto:ramkik at vmware.com>
Subject: Re: [Edge-computing] Edge Node locator

This needs to be corrected ASAP since they are both spotlighted as LF Edge projects > "MobileEdgeX and LFE EVE projects (These two are not yet open sourced)."



Rob Hirschfeld






On Tue, Feb 12, 2019 at 12:12 PM Addepalli, Srinivasa R <srinivasa.r.addepalli at intel.com<mailto:srinivasa.r.addepalli at intel.com>> wrote:
Hi Bharath,

JFYI
This work is going on in ONAP (OOF project and Edge automation project).

Other possible projects are  MobileEdgeX and LFE EVE projects (These two are not yet open sourced).

ONAP OOF project intention is to figure out the best edge location for a given workload based on following criteria:


-        Latency/Distance with respect to UEs.

-        Availability of right hardware capabilities required for the workload.

-        Cost

-        Affinity and Anti-affinity rules

-        Etc…

Once ONAP OOF chooses the edge location to  place the workload, then ONAP (via Multi-Cloud project) will place the workload by calling Openstack API or K8S API etc…

You may want to check out ONAP project.

Thanks
Srini




Thanks
Srini


From: bharath thiruveedula [mailto:bharath_ves at hotmail.com<mailto:bharath_ves at hotmail.com>]
Sent: Tuesday, February 12, 2019 9:52 AM
To: edge-computing at lists.openstack.org<mailto:edge-computing at lists.openstack.org>
Subject: [Edge-computing] Edge Node locator

Hi ,

Disclaimer: I am not sure the question following is in the scope of this forum.

I am trying to understand the Edge Architecture from UE point of view. How an app in UE can detect what the nearest edge it has to contact and how does it know whether the app is provisioned in that edge or not?

Can you please share some pointers from this perspective?

Best Regards
Bharath T
_______________________________________________
Edge-computing mailing list
Edge-computing at lists.openstack.org<mailto:Edge-computing at lists.openstack.org>
http://lists.openstack.org/cgi-bin/mailman/listinfo/edge-computing
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/edge-computing/attachments/20190212/080bf955/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 332 bytes
Desc: image001.jpg
URL: <http://lists.openstack.org/pipermail/edge-computing/attachments/20190212/080bf955/attachment-0001.jpg>