[Rust-VMM] [Stratos-dev] Xen Rust VirtIO demos work breakdown for Project Stratos

Oleksandr Tyshchenko olekstysh at gmail.com
Sat Oct 2 17:55:28 UTC 2021


On Sat, Oct 2, 2021 at 2:58 AM Stefano Stabellini <sstabellini at kernel.org>
wrote:

Hi Stefano, all

[Sorry for the possible format issues]
[I have CCed Julien]


On Tue, 28 Sep 2021, Oleksandr Tyshchenko wrote:
> > On Tue, Sep 28, 2021 at 9:26 AM Stefano Stabellini <
> sstabellini at kernel.org> wrote:
> >
> > Hi Stefano, all
> >
> > [Sorry for the possible format issues]
> >
> >
> >       On Mon, 27 Sep 2021, Christopher Clark wrote:
> >       > On Mon, Sep 27, 2021 at 3:06 AM Alex Bennée via Stratos-dev <
> stratos-dev at op-lists.linaro.org> wrote:
> >       >
> >       >       Marek Marczykowski-Górecki <
> marmarek at invisiblethingslab.com> writes:
> >       >
> >       >       > [[PGP Signed Part:Undecided]]
> >       >       > On Fri, Sep 24, 2021 at 05:02:46PM +0100, Alex Bennée
> wrote:
> >       >       >> Hi,
> >       >       >
> >       >       > Hi,
> >       >       >
> >       >       >> 2.1 Stable ABI for foreignmemory mapping to non-dom0
> ([STR-57])
> >       >       >>
> ───────────────────────────────────────────────────────────────
> >       >       >>
> >       >       >>   Currently the foreign memory mapping support only
> works for dom0 due
> >       >       >>   to reference counting issues. If we are to support
> backends running in
> >       >       >>   their own domains this will need to get fixed.
> >       >       >>
> >       >       >>   Estimate: 8w
> >       >       >>
> >       >       >>
> >       >       >> [STR-57] <https://linaro.atlassian.net/browse/STR-57>
> >       >       >
> >       >       > I'm pretty sure it was discussed before, but I can't
> find relevant
> >       >       > (part of) thread right now: does your model assumes the
> backend (running
> >       >       > outside of dom0) will gain ability to map (or access in
> other way)
> >       >       > _arbitrary_ memory page of a frontend domain? Or worse:
> any domain?
> >       >
> >       >       The aim is for some DomU's to host backends for other
> DomU's instead of
> >       >       all backends being in Dom0. Those backend DomU's would
> have to be
> >       >       considered trusted because as you say the default memory
> model of VirtIO
> >       >       is to have full access to the frontend domains memory map.
> >       >
> >       >
> >       > I share Marek's concern. I believe that there are Xen-based
> systems that will want to run guests using VirtIO devices without
> >       extending
> >       > this level of trust to the backend domains.
> >
> >       >From a safety perspective, it would be challenging to deploy a
> system
> >       with privileged backends. From a safety perspective, it would be a
> lot
> >       easier if the backend were unprivileged.
> >
> >       This is one of those times where safety and security requirements
> are
> >       actually aligned.
> >
> >
> > Well, the foreign memory mapping has one advantage in the context of
> Virtio use-case
> > which is that Virtio infrastructure in Guest doesn't require any
> modifications to run on top Xen.
> > The only issue with foreign memory here is that Guest memory actually
> mapped without its agreement
> > which doesn't perfectly fit into the security model. (although there is
> one more issue with XSA-300,
> > but I think it will go away sooner or later, at least there are some
> attempts to eliminate it).
> > While the ability to map any part of Guest memory is not an issue for
> the backend running in Dom0
> > (which we usually trust), this will certainly violate Xen security model
> if we want to run it in other
> > domain, so I completely agree with the existing concern.
>
> Yep, that's what I was referring to.
>
>
> > It was discussed before [1], but I couldn't find any decisions regarding
> that. As I understand,
> > the one of the possible ideas is to have some entity in Xen (PV
> IOMMU/virtio-iommu/whatever)
> > that works in protection mode, so it denies all foreign mapping requests
> from the backend running in DomU
> > by default and only allows requests with mapping which were *implicitly*
> granted by the Guest before.
> > For example, Xen could be informed which MMIOs hold the queue PFN and
> notify registers
> > (as it traps the accesses to these registers anyway) and could
> theoretically parse the frontend request
> > and retrieve descriptors to make a decision which GFNs are actually
> *allowed*.
> >
> > I can't say for sure (sorry not familiar enough with the topic), but
> implementing the virtio-iommu device
> > in Xen we could probably avoid Guest modifications at all. Of course,
> for this to work
> > the Virtio infrastructure in Guest should use DMA API as mentioned in
> [1].
> >
> > Would the “restricted foreign mapping” solution retain the Xen security
> model and be accepted
> > by the Xen community? I wonder, has someone already looked in this
> direction, are there any
> > pitfalls here or is this even feasible?
> >
> > [1]
> https://lore.kernel.org/xen-devel/464e91ec-2b53-2338-43c7-a018087fc7f6@arm.com/
>
> The discussion that went further is actually one based on the idea that
> there is a pre-shared memory area and the frontend always passes
> addresses from it. For ease of implementation, the pre-shared area is
> the virtqueue itself so this approach has been called "fat virtqueue".
> But it requires guest modifications and it probably results in
> additional memory copies.
>

I got it. Although we would need to map that pre-shared area anyway (I
presume it could be done at once during initialization), I think it much
better than
map arbitrary pages at runtime. If there is a way for Xen to know the
pre-shared area location in advance it will be able to allow mapping this
region only and deny other attempts.




>
> I am not sure if the approach you mentioned could be implemented
> completely without frontend changes. It looks like Xen would have to
> learn how to inspect virtqueues in order to verify implicit grants
> without frontend changes.


I looked through the virtio-iommu specification and corresponding Linux
driver but I am sure I don't see all the challenges and pitfalls. Having a
limited knowledge of IOMMU infrastructure in Linux, below is just my guess,
which might be wrong.

1. I think, if we want to avoid frontend changes the backend in Xen would
need to fully conform to the specification, I am afraid that besides just
inspecting virtqueues, the backend needs to properly and completely emulate
the virtio device, handle shadow page tables, etc. Otherwise we might break
the guest. I expect a huge amount of work to implement this properly.

2. Also, if I got the things correctly, it looks like when enabling
virtio-iommu, all addresses passed in requests to the virtio devices behind
the virtio-iommu will be in guest virtual address space (IOVA). So we would
need to find a way for userspace (if the backend is IOREQ server) to
translate them to guest physical addresses (IPA) via these shadow page
tables in the backend in front of mapping them via foreign memory map
calls. So I expect Xen, toolstack and Linux privcmd driver changes and
additional complexity taking into account how the data structures could be
accessed (data structures being continuously in IOVA, could be
discontinuous in IPA, indirect table descriptors, etc).
I am wondering, would it be possible to have identity IOMMU mapping (IOVA
== GPA) at the guest side but without bypassing an IOMMU, as we need the
virtio-iommu frontend to send map/unmap requests, can we control this
behaviour somehow?
I think this would simplify things.

3. Also, we would probably want to have a single virtio-iommu device
instance per guest, so all virtio devices which belong to this guest will
share the IOMMU mapping for the optimization purposes. For this to work all
virtio devices inside a guest should be attached to the same IOMMU domain.
Probably, we could control that, but I am not 100% sure.





> With or without guest modifications, I am not
> aware of anyone doing research and development on this approach.





-- 
Regards,

Oleksandr Tyshchenko
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opendev.org/pipermail/rust-vmm/attachments/20211002/97820fec/attachment-0001.htm>


More information about the Rust-vmm mailing list